Computer Simulation Analysis of Aircraft Circular Tube Flow Field Based on Finite Element Method
Main Article Content
Abstract
Aiming at the problem of heat dissipation performance of disc brake, a computer simulation method is used to analyze the braking process. Taking ventilated brake disc as the research object, four geometric models of ventilated brake disc with different arrays and shapes were established. Considering typical braking conditions, the heat dissipation characteristics of ventilated brake discs were simulated by computational fluid dynamics (CFD). The influence of array mode and shape of rib heat dissipation structure on heat dissipation characteristics of ventilated brake disc is analyzed. The results show that the array mode of the rib plate heat dissipation structure in the radial ventilation duct has a great influence on the heat dissipation characteristics of the brake disc. In the ventilation duct of the triangular array ribbed heat dissipation structure, there is less air resistance, stronger turbulence, less flow separation, higher convective heat transfer coefficient and heat flux.
Downloads
Article Details
COPYRIGHT
Submission of a manuscript implies: that the work described has not been published before, that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication, the authors agree to automatic transfer of the copyright to the publisher.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
- The journal allows the author(s) to retain publishing rights without restrictions.
- The journal allows the author(s) to hold the copyright without restrictions.
References
Q. Long. “Reconstruction of blood flow patterns in a human carotid bifurcation: A combined CFD and MRI study,†Journal of Magnetic Resonance Imaging, vol.11, pp.299-311, October 2015.
W.G. Habashi, J. Dompierre. “Anisotropic mesh adaptation: towards userâ€independent, meshâ€independent and solverâ€independent CFD. Part I: general principles,†International Journal for Numerical Methods in Fluids, vol.32, pp.206-209, October 2015.
M.S. Gundeti. “Paediatric robotic-assisted laparoscopic augmentation ileocystoplasty and Mitrofanoff appendicovesicostomy (RALIMA): feasibility of and initial experience with the University of Chicago technique,†Bju International, vol.33, pp.234-237, August 2016.
L. Zheng. “Modal analysis of threshing drum based on ANSYS,â€. Agricultural Mechanization Research, vol. 31, pp. 407-411, January 2014.
L. Dahmani. “Crack identification in reinforced concrete beams using ANSYS software,†Strength of Materials, vol. 01, pp. 464-468, April 2014.